Combo Xrotor 4in1 ESC (Micro 4in1 ESC&FC(BL32/F4-G3))

Description

30 Days Return Policy
Fast Delivery
Trusted seller
Combo Xrotor 4in1 ESC (Micro 4in1 ESC&FC(BL32/F4-G3))
Product Description
COMBO Xrotor 4in1 ESC (Micro 4in1 ESC&FC(BL32/F4-G3)) SKU:38040302
Board load 12V BEC, the output current can reach 2A. It can supply power for graphic transmission, 12V LED lamp and other equipments. The SPI ICM-20602 which integrates accelerometer and gyro (with the running frequency can be set to 32KHz) is adopted.
Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM and etc. LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the FC. Volt/Amp monitoring port allows users to check the battery voltage (BAT port) and current (CRT port , extra current meter is needed). Buzzer output port allows users to connect external buzzer(s) to the FC for warning or informing the flight status of the aircraft.
Compatible with DJI AIR UNIT
Flight Controller Redesign every aspect STM32 F405 MCU allows the FC to run the PID looptime and gyro with higher frequency. Board load 12V BEC, the output current can reach 2A. It can supply power for graphic transmission, 12V LED lamp and other equipments. The SPI ICM-20602 which integrates accelerometer and gyro (with the running frequency can be set to 32KHz) is adopted. Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via the Betaflight software. (Note: the OSD is controlled by the F4 MCU.) The FC which supports Betaflight firmware & allows parameter adjustment via Betaflight software is more applicable to FPV race. F-card which can record and save more flight/black box data allows users to adjust thesetup of their aircraft easily. Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM and etc. LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the FC. 60A 4in1 ESC High-performance 32-bit microprocessor with the running frequency of up to 48MHz for excellent performance. BLHeli_32 firmware is the third generation BLHeli, following base BLHeli and BLHeli-S. All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inntly also does active freewheeling. The code supports features to prevent sync loss. T are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments. The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us). Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power-up. The code also supports a beacon functionality, w the ESC will start beeping after a given time of zero throttle. This can be very useful for find
Shipping
Returns
Payment
Shipping
Shipping is FREE to all addresses other than APO/PO boxes in the lower 48 states. All our stock ships from US-based warehouses. Shipped via USPS or UPS (depending on location and package weight) Unless stated otherwise, all orders will ship within 24-72 hours of your payment being processed. Check our feedback to see the great reviews of FAST shipping we offer.
Returns
As our valued customer, we will do our best to make sure the product you receive arrives to you on time and as expected. If you are not satisfied with your purchase, please contact us within 30 days of receiving your order to process a return.
Payment
We currently accept payment via PayPal only. Once payment is cleared, we will dispatch your shipment within 1-3 business days. Please refer to the "Shipping" tab for more information regarding shipping speed to your destination.