Futaba CGY760R Gyro w/GPB-1 Programmer : P-GY760R-GBP1

Description

Futaba CGY760R Gyro w/GPB-1 Programmer : P-GY760R-GBP1
This product data sheet is originally written in English.
Midland Helicopters Ltd
Listings
Feedback
About
Listings
Feedback
About
The Futaba GY760R contains an extremely precise 3-axis heading hold gyro, a (T-FHSS/FASSTest) receiver and head speed governor for use in high performance RC helicopters. As an all in one unit, the GY760R is easy to install, and keeps wiring to a minimum. This allows a neater installation, whilst the simplicity and reduction in part count reduces the possibility of errors or failures. The GY760R is programmed using the dedicated GPB-1 programming unit either by connecting it directly to the programming port or alternatively connecting it to the trainer port on your transmitter to enable an assistant to make changes wirelessly as you fly, dramatically reducing the time it takes to fine tune your model.
Combined receiver, governor and 3-axis heading hold gyro
Easy to install and simple to connect
Compact and light weight package
The case is made from aluminium with a high quality anodic oxidation coating finish
Screw holes in the base of the unit allow simple and secure installation
To take advantage of the free firmware updates a CIU-2 or CIU-3 is required (sold separately)
Gyro Section
Advanced and adaptive PID control loop (as used in the CGY750 V2.0)
The GY760R can be installed in various orientations as required
Rudder (Yaw)
Suited to both Digital (1520uSec / 760uSec) and Analogue (1520uSec) servos
3D and SPORTS modes available
Aileron (Roll) & Elevator (Pitch)
F3C and 3D modes available
Supports H3-90 / H3-120 / H3-140 / H4-00 / H4-45 swashplate types
Suited to both Digital (1520uSec) and Analogue (1520uSec) servos
(* 760uSec digital will be enabled in the future)
Head Speed Governor
Advanced and adaptive PID control loop (as used in the CGY750)
Capable of governing head speeds from 700 to 4,000 rpm
Suited to both Digital (1520uSec) and Analogue (1520uSec) servos
Governor or Revolution limiting modes available
Cutting edge control algorithm provides more consistent RPM governing
Revolution sensor is compatible with the GV-1 and CGY750. The CGY760R also supports an optional back plate revolution sensor
RPM data can be sent back to the transmitter as a telemetry function
Receiver Section
FASSTest (18ch or 12ch mode) and T-FHSS Air transmission modes can be used (selectable using GPB-1)
Diversity aerial (2 aerials are installed for improved signal security)
Telemetry functions (Battery voltage, S.BUS sensor connected to S.BUS2 port and RPM data)
GPB-1 Program Box
The GBP-1 is the programming box for CGY760R. It can be connected to the dedicated port on CGY760R, allowing you to check and change the settings at the press of a button.
128x64px LCD screen with backlight
4 Push keys and a beeper for easy operation
Power is provided from CGY760R so no extra battery is needed.
You can wirelessly adjust some settings through the trainer function of the transmitter, connected this to GPB-1 using a dedicated cable.
Programming / setup information:
The CGY760 can be programmed via a wire using the GBP-1 programmer box, or wirelessly using the GBP-1 and the trainer port on a Futaba transmitter. To do this, you set 2 of the trainer channels up in the transmitter so the GBP-1 can send setup information over them to the CGY760.
The 32MZ and the 16IZ transmitters support wireless setup without using the GBP-1 BUT you can only modify flight parameters, not setup things like servo direction, etc.
Changing base functionality of the CGY760 requires the use of the GBP-1 programmer.
One GBP-1 programmer can be used to setup multiple CGY760 flight controllers.
Contact Information
You can contact us directly through eBay's messaging system.
Our business address is:
Midland Helicopters Ltd, Unit 11 Newton Road, Harrowbrook Industrial Estate, Hinckley, Leicestershire, LE10 3DS, England, UK
The Futaba GY760R contains an extremely precise 3-axis heading hold gyro, a (T-FHSS/FASSTest) receiver and head speed governor for use in high performance RC helicopters. As an all in one unit, the GY760R is easy to install, and keeps wiring to a minimum. This allows a neater installation, whilst the simplicity and reduction in part count reduces the possibility of errors or failures. The GY760R is programmed using the dedicated GPB-1 programming unit either by connecting it directly to the programming port or alternatively connecting it to the trainer port on your transmitter to enable an assistant to make changes wirelessly as you fly, dramatically reducing the time it takes to fine tune your model. The CGY760 can be programmed via a wire using the GBP-1 programmer box, or wirelessly usi
Category
Futaba
EAN
4513886030802
MPN
P-GY760R-GBP1
Brand
Futaba
LargeLetterCompatible
Parcel
Manufacturer
Futaba