Futaba GY611 SMM Rate Gyro W/ S9256 Servo - R/C Heli

Description

This is the Futaba GY611 Gyro w/ SMM Technology and Futaba S9256 Digital Servo! Newest generation SMM (Silicon Micro Machine) technology and a low-back aeroform case enhance vibration resistance and neutral characteristic. The GY611's highly precise angular velocity sensor allows the AVCS to perform even better, minimizing rudder neutral position drift and eliminating the need to trim the rudder during flight.This feature is the equivalent of heading hold, except that it utilizes a gyro sensor that's more accurate and less susceptible to vibration than conventional piezo gyros. It continually sends control signals to the servo , even when the tail is not moving, for extremely low temperature drift and more positive control for hovering and flying in crosswinds.
The high-resolution 12-bit Analog to Digital accurately converts the sensor output to a digital signal. A super narrow pulse (760µs) drive system greatly improves servo response; high-speed processing boosts gyro response. Includes a high-response S9256 servo that's compatible with the super narrow pulse drive and features an alumite case with heat sink.
It's ground-breaking Futaba innovation, resulting in a line of helicopter gyros and servos like nothing you've ever seen. The new GY series gyro feature several high-tech advantages over conventional piezo engineering that make R/C helicopter flying even more stable and reliable.
GY611 Features:
8-character dot matrix liquid crystal display
Highly precise angular velocity sensor
High-resolution 12-bit Analog to Digital accurately converts the sensor output to a digital signal.
Newest generation SMM (Silicon Micro Machine) technology
Low-back aeroform case to enhance vibration resistance
GY611 Specifications:
Sensor Type:
SMM (Silicon Micro Machine)
Weight:
64g
(34g amp) + (30g sensor)
Dimensions:
57x32x15mm (2.24x1.26x.59") (amp)
Dimensions:
30x30x18 mm (1.18x1.18x.71") (sensor)
Gain Type:
Remote gain feature and transmitter-controlled switching to AVCS (heading hold)
Operating Voltage:
3.8V to 6.0V DC
Reversing Switch:
Yes
High/Low Frame Rate Select:
Yes
Servo Travel Limiter:
Yes
Power consumption:
70mA (@5.0V, including sensor)
S9256 Specifications:
Dimensions:
40x20x36.6mm (1.57x.79.1.44")
Weight:
57g
Speed:
0.06sec/60º (at 4.8V)
Torque:
3.4kg-cm (at 4.8V) 47 oz-in
Used excellent condition.. works great.. As-Is no returns