-40%
HolyBro Kakute F7 HDV and Tekko32 F4 4in1 45A ESC Stack - Work With DJI FPV VTx
$ 53.43
- Description
- Size Guide
Description
HolyBro Kakute F7 HDV and Tekko32 F4 4in1 45A ESC Stack - Work With DJI FPV VTx Module.The port to the DJI air unit on KAKUTE F7 HDV and KAKUTE F7 HDV AIO have been optimized, the output voltage has increased to 9V/2A. KAKUTE F7 HDV Overview HolyBro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply. Features Supports Betaflight. High-performance / low-noise IMU. MPU6000 with 6-axis gyro and accelerometer. Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA for use with external GPS/magnetometer units. Dedicated bootloader button for easy firmware flashing. Low-profile design fits into even very compact frames. Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only). Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the KAKUTE F7 HDV monitors voltage directly from the power supply. Filtered voltage output for clean, noise-free video. 2 On-board regulators output 5V and 8V. 5V output up to 1.5A to power peripherals such as receiver, FPV camera, or LED strip. 9V output up to 2A to DJI FPV VTx. Supports BLHeli pass-through for easy ESC upgrade and configuration. Specifications MCU: STM32F745 32-bit processor IMU:MPU6000 Barometer: BMP280 USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART) 6 hardware UARTS (UART1,2,3,4,6,7) All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”. Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported. TF card for Blackbox logging Dimensions: 35x35mm Mounting Holes: Standard 30.5mm square to center of holes Weight: 8g Tekko32 F4 4in1 ESC(45A) Features: F4 MCU, double the speed of F051 32bit ESC with BLHELI32 firmware Maximum PWM output upto 128K (default 96K) Supports 3-6S lipo input PWM input, TLM supported Voltage output (VBAT) No output BEC Supports oneshot / Multishot / Dshot / PWM Supports damped light Extra capacitor needed for high current or 6s usage Dimensions: 44x37x6mm Mounting holes 30.5x30.5mm(M4) Weight: 13.3g Pin MAP: Please update your BLHeliSuite32 into the latest version. Package includes: SKU20071 KAKUTE F7 HDV & TEKKO32 F3 4IN1 ESC(45A) SKU20080 KAKUTE F7 HDV & TEKKO32 F3 METAL 4IN1 ESC(65A) SKU20120 KAKUTE F7 HDV & TEKKO32 F4 4IN1 ESC(45A) KAKUTE F7 HDV STACK *1 Electrolytic capacito: 1000uF 35v *1 8pin to 8pin 1mm pitch 65mm cable *1 8pin to 8pin 1mm pitch 25mm cable *1 JST GHR 8pin to JST GHR 6pin 80mm cable*1 ( The cable that goes to the DJI Air Unit is included.) JST GHR 8pin to JST GHR 6pin 150mm cable*1 ( The cable that goes to the DJI Air Unit is included.) Manual: Holybro Kakute F7 HDV Manual Tekko32 F3 Metal 4in1 ESC(65A) SPEC Tekko32 F3 4in1 ESC(45A) SPEC Tekko32 F4 4in1 ESC(45A) SPEC Some Tips: BLHeli_32 ESC Firmware Overview GitHub
HolyBro Kakute F7 HDV and Tekko32 F4 4in1 45A ESC Stack - Work With DJI FPV VTx Module.
The port to the DJI air unit on KAKUTE F7 HDV and KAKUTE F7 HDV AIO have been optimized, the output voltage has increased to 9V/2A.
KAKUTE F7 HDV
Overview
HolyBro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV to the DJI FPV VTx, for both signal and power supply.
Features
Supports Betaflight.
High-performance / low-noise IMU. MPU6000 with 6-axis gyro and accelerometer.
Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA for use with external GPS/magnetometer units.
Dedicated bootloader button for easy firmware flashing.
Low-profile design fits into even very compact frames.
Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).
Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the KAKUTE F7 HDV monitors voltage directly from the power supply.
Filtered voltage output for clean, noise-free video. 2 On-board regulators output 5V and 8V. 5V output up to 1.5A to power peripherals such as receiver, FPV camera, or LED strip. 9V output up to 2A to DJI FPV VTx.
Supports BLHeli pass-through for easy ESC upgrade and configuration.
Specifications
MCU: STM32F745 32-bit processor
IMU:MPU6000
Barometer: BMP280
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
6 hardware UARTS (UART1,2,3,4,6,7)
All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
TF card for Blackbox logging
Dimensions: 35x35mm
Mounting Holes: Standard 30.5mm square to center of holes
Weight: 8g
Tekko32 F4 4in1 ESC(45A)
Features:
F4 MCU, double the speed of F051
32bit ESC with BLHELI32 firmware
Maximum PWM output upto 128K (default 96K)
Supports 3-6S lipo input
PWM input, TLM supported
Voltage output (VBAT)
No output BEC
Supports oneshot / Multishot / Dshot / PWM
Supports damped light
Extra capacitor needed for high current or 6s usage
Dimensions: 44x37x6mm
Mounting holes 30.5x30.5mm(M4)
Weight: 13.3g
Pin MAP:
Please update your BLHeliSuite32 into the latest version.
Package includes:
SKU20071 KAKUTE F7 HDV & TEKKO32 F3 4IN1 ESC(45A)
SKU20080 KAKUTE F7 HDV & TEKKO32 F3 METAL 4IN1 ESC(65A)
SKU20120 KAKUTE F7 HDV & TEKKO32
F4
4IN1 ESC(45A)
KAKUTE F7 HDV STACK *1
Electrolytic capacito: 1000uF 35v *1
8pin to 8pin 1mm pitch 65mm cable *1
8pin to 8pin 1mm pitch 25mm cable *1
JST GHR 8pin to JST GHR 6pin 80mm cable*1 ( The cable that goes to the DJI Air Unit is included.)
JST GHR 8pin to JST GHR 6pin 150mm cable*1 ( The cable that goes to the DJI Air Unit is included.)
Manual
:
Holybro Kakute F7 HDV Manual
Tekko32 F3 Metal 4in1 ESC(65A) SPEC
Tekko32 F3 4in1 ESC(45A) SPEC
Tekko32 F4 4in1 ESC(45A) SPEC
Some Tips:
BLHeli_32 ESC Firmware Overview
GitHub
×
×
×
×
×
Buy now and save!
Tell a friend
Visit store
Watch now
Postage info
Click the Postage tab above the listing description for more info
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Additional Information
No additional information at this time
Ask seller a question
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© HeliDirect
Postage
Click the Postage tab above the listing description for more info
Payment
Accepted Payment Methods
PayPal
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Buyer will pay for return shipping.
Additional Information:
HeliDirect offers a (14) day return policy for all new, unuséd items that are in brand new condition without fault, damage or otherwise. Items being returned must be brand new without any use. Any kits that have been partially or fully built, items that have been soldered, batteries that have been soldered or charged, or products that have been cut, punctured, modified or otherwise, will not be accepted as a return. Aircraft that have been “test flown” will not be accepted as a return item. - Valid returns are based upon factory sealed products that are in 100% resale condition. We will charge 20% restocking fee for this case. Shipping fee wont be refunded. - If the item(s) received has been opened, uséd or damaged, no return options will be offered. Outside of warranty, any item without fault or warranty related issue cannot be accepted back unless the item is in brand new condition, as we cannot offer an opened or uséd item to our customer base. - If a non warranty item is being returned based upon valid return guidelines (brand new, unuséd, factory sealed packaging), the original shipping fees paid by HeliDirect (if Free Shipping was uséd) will be deducted from the overall sum total. If the customer paid for a specified shipping method, these shipping fees will not be valid for a refund. ***Returning Fragile Items - In regards to returning fragile items that can be easily damaged, it is the customer’s sole responsibility to ensure that the package is packed and sealed safely, as any damage via return shipping will not be accepted. If a damaged item is received, it will be returned to the original shipping address, and will need to be settled via the customer through the shipping agent uséd. HeliDirect will not be involved in any claims, refunds, credits or otherwise for return shipping damage. *** Warranty Returns - Faulty / Damaged Item(s) Received - For any item that is faulty, damaged, or falls relating to warranty related issues, please contact our customer service department for help, and we will be sure to assist you in every way possible in regards to the matter at hand. - Please note that certain / select products we carry may be replaced or repaired direct via the manufacture, no matter when the item / product was purchased. In this case, feel free to contact us for help, and we will issue you the proper contact information so the item can be addressed via the manufacturer. However, we will be certain your warranty is properly addressed. - For valid returns, once an RMA number is received, please ship back to us via standard shipping – no upgraded shipping method, such as 2nd Day Air, Overnight, or EMS will be credited or refunded. Returns can take several days to be processed. - For DJI brand, please contact directly DJI service center. ***Return Processing Requiring Product Testing - For any item requiring testing,as the testing process via our in house technicians will require the necessary time to problem solve your return. Our goal is to isolate whatever trouble your item(s) may be experiencing, and as soon as we have the available information to proceed, you will be updated regarding this. RMA Number Information All approved return items will require an RMA number before being shipped back to our location. This number aids us in the ability to properly handle your return. Without an RMA number, your package has a probability of being mis-handled, lost or delayed, and HeliDirect will take no responsibility for any return that does not have an approved RMA number. Please contact our staff for proper RMA information, as we are happy to help you. ***Note; For all return products without contact us before. It means you violate our return policy.
eBay integration
by