Holybro Pixhawk 2.4.6 Flight Controller BOM Open Source 2M Flash Memory fmuv3*

Description

Description
Holybro Pixhawk 2.4.6 Flight Controller BOM Open Source 2M Flash Memory fmuv3 Supports APM/PX4
Features:
• Advanced 32 bit ARM Cortex® M4 Processor running NuttX RTOS.
• 14 PWM/servo outputs (8 with failsafe and manual override, 6 auxiliary, high-power compatible).
• Abundant connectivity options for additional peripherals (UART, I2C, CAN).
• Integrated backup system for in-flight recovery and manual override with dedicated processor and stand-alone power supply.
• Backup system integrates mixing, providing consistent autopilot and manual override mixing modes.
• Redundant power supply inputs and automatic failover.
• External safety button for easy motor activation.
• Multicolor LED indicator.
• High-power, multi-tone piezo audio indicator.
• MicroSD card for long-time high-rate logging.
• Super precise digital GPS with compass.
• Telemetry with OSD (433Mhz/915Mhz).
Specification:
Input Voltage: 2~12S (7.4~51V)
Size: 81x44x15mm
Weight: 33.1g
Microprocessor:
32-bit STM32F427 Cortex M4 core with FPU
168 MHz/256 KB RAM/2 MB Flash
32 bit STM32F103 failsafe co-processor
Sensors:
ST Micro L3GD20 3-axis 16-bit gyroscope
ST Micro LSM303D 3-axis 14-bit accelerometer / magnetometer
Invensense MPU 6000 3-axis accelerometer/gyroscope
MEAS MS5611 barometer
Interfaces:
-5x UART (serial ports), one high-power capable, 2x with HW flow control
-2x CAN
-Spektrum DSM / DSM2 / DSM-X® Satellite compatible input up to DX8 (DX9 and above not supported)
-Futaba S.BUS® compatible input and output
-PPM sum signal
-RSSI (PWM or voltage) input
-I2C®
-SPI
-3.3 and 6.6V ADC inputs
-External microUSB port
Power:
PCB Current: total 120A outputs (MAX)
UBEC input voltage : 7~51v (2~12s LiPo)
Voltage and current measurement configured for 5V ADC
Switching regulator outputs 5.2V and 3A max
6-pos Molex cable plugs directly to APM/Pix32's 'PM' connector
6-pos GH cable plugs directly to Pixhawk4/Pixhawk4 mini 'PM' connector
Package List:
-1 x Flight Controller
-1 x 10s Power Module
-1 x 4p to 4p Cable (I2C)
-1 x 6p to 6p Cable (Power)
-3 x ARM Rover
-1 x TF Card Reader
-1 x I2C Splitter Board
-4 x Damping Foam
-1 x Dupont Cable
-1 x Micro USB Cable
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
On Mar-03-21 at 00:18:55 PST, seller added the following information: