Matek BetaFlight FC Flight Controller F405-OSD for FPV Quad Drone Race 1pc

Description

100% Original
Fair Pricing
Fast Shipping
BUY NOW!
Matek BetaFlight FC Flight Controller F405-OSD for FPV Quad Drone Race 1pc
Spec:
MCU: 168MHz STM32F405
IMU: 32K ICM20602 accelerometer/gyro (SPI)
Support 32K Gyro update & 16K PID Loop
OSD: BetaFlight OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP, UART1, UART2, UART3, UART4, UART5
Built in inverter for SBUS input (UART2-RX)
PPM/UART Shared: UART2-RX
Support SoftSerial on S5 & S6
Battery Voltage Sensor: 1:10
Currsnt Sensor: No (FCHUB-6S option)
BEC 5V & 10V: No (FCHUB-6S option)
LDO 3.3V: Max.300mA for Spektrum RX
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
2x LEDs for FC STATUS (Blue, Red)
6x PWM / DShot outputs without conflict
5x UARTs
1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Sginal/GND
4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
1x Side-press button for BOOT(DFU) mode
1x 16pin bottom mounted FFC Slot for FCHUB-6S connection
36x36mm PCB with 30.5mm mounting holes
w/ 1x 0.5mm*16Pin 5cm Flexible Flat Cable
w/ 4pcs M3 Anti-vibration Standoffs
** Note **
For XSR/X4RSB user, please upgrade your RX to latest firmware version to enable PID tuning and Smartaudio VTX tuning. Should you have any question, please email us for help.
Payment
Shipping
Returns
Secure & Easy Ordering. Orders can be placed online using PayPal to ensure a safe and secure transaction and guarantee you privacy. The address in Paypal is the address your order will be shipped to. We are only able to dispatch goods once payment has cleared. All refunds are issued via PayPal only.
Fast worldwide shipping with tracking number. We reserve the right not to ship to any unconfirmed PayPal addresses. Shipments usually takes 5-15 working days to your PayPal registered address.
ITALY, ISRAEL, SPAIN, GERMANY, EASTERN EUROPE, SOUTH AMERICA, AFRICA AND MIDDLE EAST may take from 10-25 days due the slow postal services and strict custom clearances.
After receiving the item, contact us within : 30 Days
Refund will be given as : Money back or item exchange (buyer's choice)
Return shipping : Buyer pays return shipping
100% Original
Fair Pricing
Fast Shipping
Spec: MCU: 168MHz STM32F405 IMU: 32K ICM20602 accelerometer/gyro (SPI) Support 32K Gyro update & 16K PID Loop OSD: BetaFlight OSD w/ AT7456E chip Blackbox: MicroSD card slot (SD/SDHC) VCP, UART1, UART2, UART3, UART4, UART5 Built in inverter for SBUS input (UART2-RX) PPM/UART Shared: UART2-RX Support SoftSerial on S5 & S6 Battery Voltage Sensor: 1:10 Currsnt Sensor: No (FCHUB-6S option) BEC 5V & 10V: No (FCHUB-6S option) LDO 3.3V: Max.300mA for Spektrum RX WS2812 Led Strip : Yes Beeper : Yes RSSI: Yes 2x LEDs for FC STATUS (Blue, Red) 6x PWM / DShot outputs without conflict 5x UARTs 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Sginal/GND 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible) 1x Side-press button for BOOT(DFU) mode 1x 16pin bottom mounted FFC Slot for FCHUB-6S connection 36x36mm PCB with 30.5mm mounting holes w/ 1x 0.5mm*16Pin 5cm Flexible Flat Cable w/ 4pcs M3 Anti-vibration Standoffs ** Note ** For XSR/X4RSB user, please upgrade your RX to latest firmware version to enable PID tuning and Smartaudio VTX tuning. Should you have any question, please email us for help.
100% Original
BUY NOW!
Matek BetaFlight FC Flight Controller F405-OSD for FPV Quad Drone Race 1pc
Spec:
MCU: 168MHz STM32F405
IMU: 32K ICM20602 accelerometer/gyro (SPI)
Support 32K Gyro update & 16K PID Loop
OSD: BetaFlight OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP, UART1, UART2, UART3, UART4, UART5
Built in inverter for SBUS input (UART2-RX)
PPM/UART Shared: UART2-RX
Support SoftSerial on S5 & S6
Battery Voltage Sensor: 1:10
Currsnt Sensor: No (FCHUB-6S option)
BEC 5V & 10V: No (FCHUB-6S option)
LDO 3.3V: Max.300mA for Spektrum RX
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
2x LEDs for FC STATUS (Blue, Red)
6x PWM / DShot outputs without conflict
5x UARTs
1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Sginal/GND
4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
1x Side-press button for BOOT(DFU) mode
1x 16pin bottom mounted FFC Slot for FCHUB-6S connection
36x36mm PCB with 30.5mm mounting holes
w/ 1x 0.5mm*16Pin 5cm Flexible Flat Cable
w/ 4pcs M3 Anti-vibration Standoffs
** Note **
For XSR/X4RSB user, please upgrade your RX to latest firmware version to enable PID tuning and Smartaudio VTX tuning. Should you have any question, please email us for help.
Payment
Secure & Easy Ordering. Orders can be placed online using PayPal to ensure a safe and secure transaction and guarantee you privacy. The address in Paypal is the address your order will be shipped to. We are only able to dispatch goods once payment has cleared. All refunds are issued via PayPal only.
Shipping
Fast worldwide shipping with tracking number. We reserve the right not to ship to any unconfirmed PayPal addresses. Shipments usually takes 5-15 working days to your PayPal registered address.
ITALY, ISRAEL, SPAIN, GERMANY, EASTERN EUROPE, SOUTH AMERICA, AFRICA AND MIDDLE EAST may take from 10-25 days due the slow postal services and strict custom clearances.
Returns
After receiving the item, contact us within : 30 Days
Refund will be given as : Money back or item exchange (buyer's choice)
Return shipping : Buyer pays return shipping
100% Original
Fast Shipping
Fair Pricing
Spec:
MCU: 168MHz STM32F405
IMU: 32K ICM20602 accelerometer/gyro (SPI)
Support 32K Gyro update & 16K PID Loop
OSD: BetaFlight OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP, UART1, UART2, UART3, UART4, UART5
Built in inverter for SBUS input (UART2-RX)
PPM/UART Shared: UART2-RX
Support SoftSerial on S5 & S6
Battery Voltage Sensor: 1:10
Currsnt Sensor: No (FCHUB-6S option)
BEC 5V & 10V: No (FCHUB-6S option)
LDO 3.3V: Max.300mA for Spektrum RX
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
2x LEDs for FC STATUS (Blue, Red)
6x PWM / DShot outputs without conflict
5x UARTs
1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Sginal/GND
4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
1x Side-press button for BOOT(DFU) mode
1x 16pin bottom mounted FFC Slot for FCHUB-6S connection
36x36mm PCB with 30.5mm mounting holes
w/ 1x 0.5mm*16Pin 5cm Flexible Flat Cable
w/ 4pcs M3 Anti-vibration Standoffs
** Note **
For XSR/X4RSB user, please upgrade your RX to latest firmware version to enable PID tuning and Smartaudio VTX tuning. Should you have any question, please email us for help.