Matek F405-WTE Flight Controller With ELRS 2.4GHz RX Integrated

Description

The Matek F405-WTE Flight Controller is a powerful, full-featured board with integrated WiFi and ExpressLRS 2.4GHz receiver.  One of the first of its kind, another great product from the minds at Matek SYS.
Specifications
:
MCU: STM32F405RGT6, 168MHz , 1MB Flash
IMU: ICM42688-P
Baro: SPL06-001
OSD: AT7456E
Blackbox: MicroSD card slot
ESP WiFi Telemetry(MAVLink, 14dBm)
ExpressLRS 2.4G receiver(CRSF protocol, Telemetry 12dBm)
6x UARTs,  1x Softserial_Tx option(INAV)
12x PWM outputs
1x I2C
4x ADC (VBAT, Current, RSSI, Airspeed)
USB/Beep Extender with Type-C(USB2.0)
Dual Camera Inputs switch
9V(12V) for VTX power switch
Mounting: 25 x 25mm, Φ2mm
Dimensions: 44 x 29 x 12.7mm
Weight: 22g  w/ USB/buzzer adapter
FC Firmware
ArduPilot: MatekF405-TE
INAV: MATEKF405TE_SD (not available in INAV configurator 4.x)
PDB
Input voltage range: 6.8~30V (2~6S LiPo)
1x ESC power pads
Battery Voltage divider 1K:20K (Scale 2100 in INAV,  BATT_VOLT_MULT 21.0 in ArduPilot)
Current Senor: 220A,  3.3V ADC  (Scale 150 in INAV,  66.7 A/V in ArduPilot)
Sense resistor: 90A continuous, 220A peak
BEC 5V output
Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
Continuous current: 2 Amps, Max.3A
BEC 9V /12V output
Designed for Video Transmitter, Camera, Gimbal ect.
Continuous current: 2 Amps, Max.3A
12V option with Jumper pad
for stable 9V/12V output, input voltage should > output voltage +1V
BEC Vx output
Designed for Servos
Voltage adjustable, 5V Default, 6V or 7.2V via jumper
Continuous current: 8 Amps, Max.10A
for stable Vx output, input voltage should > Vx voltage +1V
BEC 3.3V output
Designed for Baro / Compass module and external 3.3V peripherals
Linear Regulator
Continuous current: 200mA
Includes
:
1x Matek F405-WTE Flight Controller With Integrated ELRS 2.4G RX
1x USB(TYPE-C)/Beep (Passive Buzzer) Extender
1x 20cm JST-SH-6P to JST-SH-6P Cable for USB Extender
2x IPEX-MHF1 2.4G Antennas
1x Rubycon ZLH 35V 470uF Capacitor
Dupont 2.54 Pins (Board is shipped unsoldered)