-40%
Matek Flight Controller F405-SE
$ 32.51
- Description
- Size Guide
Description
Matek Flight Controller F405-SEF405-SE Quick Start Guide Specifications MCU: 168MHz STM32F405RET6 IMU: MPU6000 (SPI) Baro: DPS310 (I2C) OSD: AT7456E (SPI) Blackbox: MicroSD slot (SPI) VCP & 6x Uarts, 1x Softserial_Tx supported 9x PWM outputs (7x Dshot compatible with BF/INAV) 2x I2C 3x ADC (voltage, current, RSSI) 4x RX6 pad(one per corner) for BLheli32 ESC telemetry 4x individual ESC power/signal pads 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) Built in inverter on UART2-RX for SBUS input PPM/UART Shared: UART2-RX Vbat filtered output power for VTX Camera control: Yes Smartaudio & Tramp VTX protocol: Yes DJI FPV OSD protocol: Yes WS2812 Led Strip : Yes Beeper : Yes RSSI: Yes PDB Specifications Input: 6~36V (2~8S LiPo) w/TVS protection PDB: 4x35A (Max.4x46A) BEC: 5V 2A cont. (Max.3A) LDO 3.3V: Max.200mA Current Sensor 184A (Scale 179 in INAV/BF) Battery Voltage Sensor: 1K:10K Firmware INAV: MATEKF405SE BetaFlight: MATEKF405SE ArduPilot: MATEKF405-WING Physical Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm Dimensions: 36 x 46 mm Weight: 10g Including 1x F405-SE 6x silicon grommets M4 to M3 1x FR4 PCB Plate 36*36*1mm 1x Rubycon ZLH 35V/470uF (Low ESR)
Matek Flight Controller F405-SE
F405-SE Quick Start Guide
Specifications
MCU: 168MHz STM32F405RET6
IMU: MPU6000 (SPI)
Baro: DPS310 (I2C)
OSD: AT7456E (SPI)
Blackbox: MicroSD slot (SPI)
VCP & 6x Uarts, 1x Softserial_Tx supported
9x PWM outputs (7x Dshot compatible with BF/INAV)
2x I2C
3x ADC (voltage, current, RSSI)
4x RX6 pad(one per corner) for BLheli32 ESC telemetry
4x individual ESC power/signal pads
1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
Built in inverter on UART2-RX for SBUS input
PPM/UART Shared: UART2-RX
Vbat filtered output power for VTX
Camera control: Yes
Smartaudio & Tramp VTX protocol: Yes
DJI FPV OSD protocol: Yes
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
PDB Specifications
Input: 6~36V (2~8S LiPo) w/TVS protection
PDB: 4x35A (Max.4x46A)
BEC: 5V 2A cont. (Max.3A)
LDO 3.3V: Max.200mA
Current Sensor 184A (Scale 179 in INAV/BF)
Battery Voltage Sensor: 1K:10K
Firmware
INAV: MATEKF405SE
BetaFlight: MATEKF405SE
ArduPilot: MATEKF405-WING
Physical
Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
Dimensions: 36 x 46 mm
Weight: 10g
Including
1x F405-SE
6x silicon grommets M4 to M3
1x FR4 PCB Plate 36*36*1mm
1x Rubycon ZLH 35V/470uF (Low ESR)
×
×
×
×
×
Buy now and save!
Tell a friend
Visit store
Watch now
Postage info
Click the Postage tab above the listing description for more info
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Additional Information
No additional information at this time
Ask seller a question
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© HeliDirect
Postage
Click the Postage tab above the listing description for more info
Payment
Accepted Payment Methods
PayPal
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Buyer will pay for return shipping.
Additional Information:
HeliDirect offers a (14) day return policy for all new, unuséd items that are in brand new condition without fault, damage or otherwise. Items being returned must be brand new without any use. Any kits that have been partially or fully built, items that have been soldered, batteries that have been soldered or charged, or products that have been cut, punctured, modified or otherwise, will not be accepted as a return. Aircraft that have been “test flown” will not be accepted as a return item. - Valid returns are based upon factory sealed products that are in 100% resale condition. We will charge 20% restocking fee for this case. Shipping fee wont be refunded. - If the item(s) received has been opened, uséd or damaged, no return options will be offered. Outside of warranty, any item without fault or warranty related issue cannot be accepted back unless the item is in brand new condition, as we cannot offer an opened or uséd item to our customer base. - If a non warranty item is being returned based upon valid return guidelines (brand new, unuséd, factory sealed packaging), the original shipping fees paid by HeliDirect (if Free Shipping was uséd) will be deducted from the overall sum total. If the customer paid for a specified shipping method, these shipping fees will not be valid for a refund. ***Returning Fragile Items - In regards to returning fragile items that can be easily damaged, it is the customer’s sole responsibility to ensure that the package is packed and sealed safely, as any damage via return shipping will not be accepted. If a damaged item is received, it will be returned to the original shipping address, and will need to be settled via the customer through the shipping agent uséd. HeliDirect will not be involved in any claims, refunds, credits or otherwise for return shipping damage. *** Warranty Returns - Faulty / Damaged Item(s) Received - For any item that is faulty, damaged, or falls relating to warranty related issues, please contact our customer service department for help, and we will be sure to assist you in every way possible in regards to the matter at hand. - Please note that certain / select products we carry may be replaced or repaired direct via the manufacture, no matter when the item / product was purchased. In this case, feel free to contact us for help, and we will issue you the proper contact information so the item can be addressed via the manufacturer. However, we will be certain your warranty is properly addressed. - For valid returns, once an RMA number is received, please ship back to us via standard shipping – no upgraded shipping method, such as 2nd Day Air, Overnight, or EMS will be credited or refunded. Returns can take several days to be processed. - For DJI brand, please contact directly DJI service center. ***Return Processing Requiring Product Testing - For any item requiring testing,as the testing process via our in house technicians will require the necessary time to problem solve your return. Our goal is to isolate whatever trouble your item(s) may be experiencing, and as soon as we have the available information to proceed, you will be updated regarding this. RMA Number Information All approved return items will require an RMA number before being shipped back to our location. This number aids us in the ability to properly handle your return. Without an RMA number, your package has a probability of being mis-handled, lost or delayed, and HeliDirect will take no responsibility for any return that does not have an approved RMA number. Please contact our staff for proper RMA information, as we are happy to help you. ***Note; For all return products without contact us before. It means you violate our return policy.
eBay integration
by