MatekSys Flight Controller F722-MINI SE FPV Quad Drone Race Free Style NEW 1pc

Description

100% Original
Fair Pricing
Fast Shipping
BUY NOW!
MatekSys Flight Controller F722-MINI SE FPV Quad Drone Race Free Style NEW 1pc
Mateksys Flight Controller F722-MINI SE
Including
1x FC F722-miniSE
1x 20mm to 30.5mm conversion plate
6x Silicon grommets M4 to M3
6x Brass grommets M3 to M2
1x SH1.0_8pin cable 5cm
2x SH1.0_8pin connectors
FC Specifications
MCU: 216MHz STM32F722RET6
IMU: MPU6000 (SPI)
OSD: AT7456E (SPI)
Baro: Infineon DPS310 (I2C)
Blackbox: 32M-byte Flash memory (SPI)
5x Uarts (1,2,3,4,6) with build-in inversion
1x Softserial supported
8x Dshot/Proshot/oneshot outputs
1x I2C
1x SH1.0_8pin connector (Vbat/G/Curr/R6/S1/S2/S3/S4)
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
Vbat filtered output power for VTX, Switchable via AUX (modes tab-user1)
Dual Camera image switchable via AUX (modes tab-user2)
Convertible 20mm to 30.5mm mounting
Camera control: Yes
Smartaudio & Tramp VTX protocol: Yes
DJI OSD: Yes (any spare Uart Tx & Rx)
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
Additional ADC for INAV analog airspeed
Power
Input: 6~36V (2~8S LiPo)
BEC: 5V 2A
LDO 3.3V: Max.200mA
Battery Voltage Sensor: 1:10 (Scale 110)
No Current Sensor built-in, supports external current sensor of PDB/4in1
Firmware
INAV target: MATEKF722mini
BetaFlight unified target: MATEKF722mini(MTKS)
BetaFlight legacy target: MATEKF722SE
Physical
Mounting
20 x 20mm/Φ3mm with Silicon Grommets
20 x 20mm/Φ2mm with Silicon & Brass Grommets
30.5 x 30.5mm/Φ3mm with Conversion Plate and Silicon Grommets
Dimensions: 28 x 28 mm
Weight: 5g
Payment
Shipping
Returns
Secure & Easy Ordering. Orders can be placed online using PayPal to ensure a safe and secure transaction and guarantee you privacy. The address in Paypal is the address your order will be shipped to. We are only able to dispatch goods once payment has cleared. All refunds are issued via PayPal only.
Fast worldwide shipping with tracking number. We reserve the right not to ship to any unconfirmed PayPal addresses. Shipments usually takes 5-15 working days to your PayPal registered address.
ITALY, ISRAEL, SPAIN, GERMANY, EASTERN EUROPE, SOUTH AMERICA, AFRICA AND MIDDLE EAST may take from 10-25 days due the slow postal services and strict custom clearances.
After receiving the item, contact us within : 30 Days
Refund will be given as : Money back or item exchange (buyer's choice)
Return shipping : Buyer pays return shipping
100% Original
Fair Pricing
Fast Shipping
Mateksys Flight Controller F722-MINI SE Including 1x FC F722-miniSE 1x 20mm to 30.5mm conversion plate 6x Silicon grommets M4 to M3 6x Brass grommets M3 to M2 1x SH1.0_8pin cable 5cm 2x SH1.0_8pin connectors FC Specifications MCU: 216MHz STM32F722RET6 IMU: MPU6000 (SPI) OSD: AT7456E (SPI) Baro: Infineon DPS310 (I2C) Blackbox: 32M-byte Flash memory (SPI) 5x Uarts (1,2,3,4,6) with build-in inversion 1x Softserial supported 8x Dshot/Proshot/oneshot outputs 1x I2C 1x SH1.0_8pin connector (Vbat/G/Curr/R6/S1/S2/S3/S4) 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) Vbat filtered output power for VTX, Switchable via AUX (modes tab-user1) Dual Camera image switchable via AUX (modes tab-user2) Convertible 20mm to 30.5mm mounting Camera control: Yes Smartaudio & Tramp VTX protocol: Yes DJI OSD: Yes (any spare Uart Tx & Rx) WS2812 Led Strip : Yes Beeper : Yes RSSI: Yes Additional ADC for INAV analog airspeed Power Input: 6~36V (2~8S LiPo) BEC: 5V 2A LDO 3.3V: Max.200mA Battery Voltage Sensor: 1:10 (Scale 110) No Current Sensor built-in, supports external current sensor of PDB/4in1 Firmware INAV target: MATEKF722mini BetaFlight unified target: MATEKF722mini(MTKS) BetaFlight legacy target: MATEKF722SE Physical Mounting 20 x 20mm/Φ3mm with Silicon Grommets 20 x 20mm/Φ2mm with Silicon & Brass Grommets 30.5 x 30.5mm/Φ3mm with Conversion Plate and Silicon Grommets Dimensions: 28 x 28 mm Weight: 5g ![image] (https://cdn.shopify.com/s/files/1/0948/3076/files/F722-miniSE_1.jpg?v=1599369495)![image] (https://cdn.shopify.com/s/files/1/0948/3076/files/F722-miniSE_2.jpg?v=1599369517)![image] (https://cdn.shopify.com/s/files/1/0948/3076/files/F722-miniSE_3.jpg?v=1599369529)![image] (https://cdn.shopify.com/s/files/1/0948/3076/files/F722-miniSE_4.jpg?v=1599369599)![image] (https://cdn.shopify.com/s/files/1/0948/3076/files/F722-miniSE_p.jpg?v=1599369660)![image] (https://cdn.shopify.com/s/files/1/0948/3076/files/F722-miniSE-1_layout.jpg?v=1599369684)![image] (https://cdn.shopify.com/s/files/1/0948/3076/files/F722-miniSE-2_wire.jpg?v=1599369698)
100% Original
BUY NOW!
MatekSys Flight Controller F722-MINI SE FPV Quad Drone Race Free Style NEW 1pc
Mateksys Flight Controller F722-MINI SE
Including
1x FC F722-miniSE
1x 20mm to 30.5mm conversion plate
6x Silicon grommets M4 to M3
6x Brass grommets M3 to M2
1x SH1.0_8pin cable 5cm
2x SH1.0_8pin connectors
FC Specifications
MCU: 216MHz STM32F722RET6
IMU: MPU6000 (SPI)
OSD: AT7456E (SPI)
Baro: Infineon DPS310 (I2C)
Blackbox: 32M-byte Flash memory (SPI)
5x Uarts (1,2,3,4,6) with build-in inversion
1x Softserial supported
8x Dshot/Proshot/oneshot outputs
1x I2C
1x SH1.0_8pin connector (Vbat/G/Curr/R6/S1/S2/S3/S4)
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
Vbat filtered output power for VTX, Switchable via AUX (modes tab-user1)
Dual Camera image switchable via AUX (modes tab-user2)
Convertible 20mm to 30.5mm mounting
Camera control: Yes
Smartaudio & Tramp VTX protocol: Yes
DJI OSD: Yes (any spare Uart Tx & Rx)
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
Additional ADC for INAV analog airspeed
Power
Input: 6~36V (2~8S LiPo)
BEC: 5V 2A
LDO 3.3V: Max.200mA
Battery Voltage Sensor: 1:10 (Scale 110)
No Current Sensor built-in, supports external current sensor of PDB/4in1
Firmware
INAV target: MATEKF722mini
BetaFlight unified target: MATEKF722mini(MTKS)
BetaFlight legacy target: MATEKF722SE
Physical
Mounting
20 x 20mm/Φ3mm with Silicon Grommets
20 x 20mm/Φ2mm with Silicon & Brass Grommets
30.5 x 30.5mm/Φ3mm with Conversion Plate and Silicon Grommets
Dimensions: 28 x 28 mm
Weight: 5g
Payment
Secure & Easy Ordering. Orders can be placed online using PayPal to ensure a safe and secure transaction and guarantee you privacy. The address in Paypal is the address your order will be shipped to. We are only able to dispatch goods once payment has cleared. All refunds are issued via PayPal only.
Shipping
Fast worldwide shipping with tracking number. We reserve the right not to ship to any unconfirmed PayPal addresses. Shipments usually takes 5-15 working days to your PayPal registered address.
ITALY, ISRAEL, SPAIN, GERMANY, EASTERN EUROPE, SOUTH AMERICA, AFRICA AND MIDDLE EAST may take from 10-25 days due the slow postal services and strict custom clearances.
Returns
After receiving the item, contact us within : 30 Days
Refund will be given as : Money back or item exchange (buyer's choice)
Return shipping : Buyer pays return shipping
100% Original
Fast Shipping
Fair Pricing
Mateksys Flight Controller F722-MINI SE
Including
1x FC F722-miniSE
1x 20mm to 30.5mm conversion plate
6x Silicon grommets M4 to M3
6x Brass grommets M3 to M2
1x SH1.0_8pin cable 5cm
2x SH1.0_8pin connectors
FC Specifications
MCU: 216MHz STM32F722RET6
IMU: MPU6000 (SPI)
OSD: AT7456E (SPI)
Baro: Infineon DPS310 (I2C)
Blackbox: 32M-byte Flash memory (SPI)
5x Uarts (1,2,3,4,6) with build-in inversion
1x Softserial supported
8x Dshot/Proshot/oneshot outputs
1x I2C
1x SH1.0_8pin connector (Vbat/G/Curr/R6/S1/S2/S3/S4)
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
Vbat filtered output power for VTX, Switchable via AUX (modes tab-user1)
Dual Camera image switchable via AUX (modes tab-user2)
Convertible 20mm to 30.5mm mounting
Camera control: Yes
Smartaudio & Tramp VTX protocol: Yes
DJI OSD: Yes (any spare Uart Tx & Rx)
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
Additional ADC for INAV analog airspeed
Power
Input: 6~36V (2~8S LiPo)
BEC: 5V 2A
LDO 3.3V: Max.200mA
Battery Voltage Sensor: 1:10 (Scale 110)
No Current Sensor built-in, supports external current sensor of PDB/4in1
Firmware
INAV target: MATEKF722mini
BetaFlight unified target: MATEKF722mini(MTKS)
BetaFlight legacy target: MATEKF722SE
Physical
Mounting
20 x 20mm/Φ3mm with Silicon Grommets
20 x 20mm/Φ2mm with Silicon & Brass Grommets
30.5 x 30.5mm/Φ3mm with Conversion Plate and Silicon Grommets
Dimensions: 28 x 28 mm
Weight: 5g