-40%
Mini Flight Controller Betaflight Lipo Dual BEC 9V 2.5A For GEPRC HGLRC Iflight
Mini Flight Controller Betaflight Lipo Dual BEC 9V 2.5A For GEPRC HGLRC Iflight
Mini Flight Controller Betaflight Lipo Dual BEC 9V 2.5A For GEPRC HGLRC Iflight
Mini Flight Controller Betaflight Lipo Dual BEC 9V 2.5A For GEPRC HGLRC Iflight

Mini Flight Controller Betaflight Lipo Dual BEC 9V 2.5A For GEPRC HGLRC Iflight

$ 53.66

Availability: 97 in stock
  • Age Level: 12-16 Years, 17 Years & Up
  • Model: F722 D Mini F7
  • Recommend Age: 7-12y, 12+y, 18+
  • Modified Item: No
  • Compatible Vehicle Type: Other
  • Condition: New
  • MPN: 2796699964
  • Type: Flight Controller
  • Brand: Unbranded
  • Custom Bundle: No
  • Compatible Scale: Other
  • Country/Region of Manufacture: China
  • Material: Composite Material

    Description

    Mini Flight Controller Betaflight Lipo Dual BEC 9V 2.5A For GEPRC HGLRC Iflight
    Description
    Instructions for use
    1. There are many flight control integration functions, and the components are very dense. When installing, please do not use tools (such as pointed nose pliers or sleeves) to screw the nuts, which will easily scratch the hardware of the flying tower and cause unnecessary losses. The correct way is to press the nut with your finger, and the screw driver can quickly tighten the screw from the bottom. (don't be too tight to avoid damaging PCB board)
    2. Do not install propeller when installing and debugging flight control, and try not to fly indoors to avoid safety accidents. Before installing the propeller for flight test, please check the motor steering and propeller direction again. Safety tips: please do not fly near the crowd. Our company will not be responsible for any loss caused by aircraft crash.
    3. Do not use non original aluminum or nylon columns to avoid damage to flight control hardware. The official standard configuration is custom-made nylon columns to fit the flying tower.
    4. Before the aircraft is powered on, please check again whether the installation between the flying tower connectors is correct (the pins or wires must be aligned), check whether the positive and negative electrodes of the welding are correct, and check whether the motor screw is against the motor stator to avoid short circuit.
    5. Check whether there is solder thrown out on the electronic components of the flying tower, which may lead to short circuit. If the short circuit occurs in the installation and welding, the buyer shall be responsible for it.
    HAKRC F722 DM Specification and size
    Size: 31 * 30 * 8mm
    Package size: Φ 62 * 33mm
    Installation hole distance: 20 * 20MM, φ 4mm
    Weight: 6g
    Package weight: 20g
    Processor: stm32f722ret6
    Gyroscope: mpu6000
    B E C:5V/3A ; 9V/2.5A
    Memory: 16MB
    Input voltage: 3-6s
    Firmware: betaflight_ 4.1.0_ MATEK722
    UART serial port: 5
    Package Includes:
    HK f722 DM flight control mainboard x1,
    damping ring x4,
    8p soft silicone cable x1,
    DJI HD image transmission cable x1