-40%

NeonPro ME-120-12000-30 NEON SIGN POWER SUPPLY TRANSFORMER - NEW, UL Listed

$ 28.4

Availability: 1464 in stock
  • Model: ME-120-12000-30
  • Custom Bundle: No
  • Country/Region of Manufacture: China
  • Condition: New
  • Modified Item: No
  • MPN: ME-120-12000-30
  • Non-Domestic Product: No
  • Brand: NeonPro
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Material: Solid state electronics
  • Refund will be given as: Money Back
  • Type: Electronic solid state
  • Restocking Fee: 20%

    Description

    ATTENTION:
    Stock photos. An item of equal or greater value with the same specifications may be substituted.
    FOR INDOOR USE ONLY
    !
    DISCOUNTS AVAILABLE
    for
    sign companies and neon shops
    . Contact me for details.
    BRAND NEW GENUINE
    NeonPro Model ME-120-12000-30
    with current date code, not "NOS" (new old stock).
    SPECIFICATIONS ARE LISTED BELOW.
    Please read my return policy details by clicking the "Shipping and payments" tab.
    ------------------------------
    WARNING!
    These are
    solid state
    neon transformers. They are designed to
    operate a neon sign only!
    They
    CANNOT
    be used for a Tesla coil, Jacob's ladder, wood burning, O-zone generator or other "experiments" or "projects". They are intended to power a NEON SIGN ONLY, and they
    CANNOT
    be dimmed with external dimmer controls. Attempting to do any of this will destroy the unit and
    VOID THE WARRANTY!
    For those “electrical engineer geniuses” who think they know better and can “make it work”,
    PLEASE
    DO NOT
    BUY THIS ITEM!
    -----------------------------
    NOTICE!
    BEFORE BUYING: BE SURE THIS IS THE PROBLEM!
    There are many reasons why a neon sign may not work. A bad power supply is just one possibility.
    IF YOU DO NOT KNOW OR ARE UNSURE IF THE POWER SUPPLY IS THE PROBLEM, CONTACT A
    REPUTABLE NEON SHOP OR SIGN COMPANY WHO SERVICES NEON SIGNS FOR ASSISTANCE FIRST.
    ONCE YOU HAVE CONNECTED THIS POWER SUPPLY TO YOUR SIGN AND ATTEMPT TO USE IT, WHETHER
    IT FIXES YOUR SIGN OR NOT, YOU CANNOT RETURN IT FOR A REFUND. YOU CAN ONLY RETURN IT FOR A
    REFUND IF IT HAS NOT BEEN USED. (
    Fees apply to returned items. See my "Return Policy Details".
    )
    ALL POWER SUPPLIES THAT ARE RETURNED AS DEFECTIVE ARE TESTED. IF YOU RETURN A POWER
    SUPPLY AS BEING DEFECTIVE, BUT IT IS NOT DEFECTIVE, YOU WILL BE CHARGED A DIAGNOSTIC FEE
    AS WELL AS SHIPPING CHARGES TO RETURN IT TO YOU.
    THE WARRANTY COVERS REPLACEMENT ONLY, NOT REFUNDS. IF A POWER SUPPLY IS FOUND TO BE
    DEFECTIVE WE WILL REPLACE IT. A REFUND WILL NOT BE GIVEN FOR A DEFECTIVE POWER SUPPLY.
    ------------------------------
    WE STOCK THE FOLLOWING SIZES:
    3kV Self adjusting. May be used for 2kV to 3kV.
    6kV Self adjusting. May be used for 2kV to 6kV including 4.5kV, 5kV, 5.5kV and 6kV.
    9kV Self adjusting. May be used for 2kV to 9kV including 6.5kV, 7kV, 7.5kV, 8kV and 9kV.
    12kV Self adjusting. May be used for 2kV to 12kV including 10kV, 10.5kV and 12kV.
    The 9kV and 12kV are available in flashing models.
    BRAND NEW WITH 2 YEAR WARRANTY
    (from date of manufacture like all power supply warranties)
    NeonPro Model: ME-120-12000-30
    (Standard 120 volt input, 12,000 volt equivalent secondary, 30 mA)
    UL listed and UL 2161 compliant.
    This is a commercial duty solid-state electronic transformer for indoor use.
    Self-adjusting up to a 12 KV load
    (compares to a conventional core & coil 12,000 volt transformer).
    Includes integral sleeve silicone GTO-10 secondary leads (very flexible), on-off pull chain switch and instructions.
    SPECIFICATIONS:
    MODEL: Me-120-12000-30
    INPUT: 120VAC 50/60Hz 0.9A
    POWER: 108W
    OUTPUT: 12kV PEAK / 8kV RMS (
    8kV output will be shown on the label
    )
    POWER FACTOR: PF>0.9,THD<45%
    WORKING FREQUENCY: 23-25KHz
    OVERLOAD PROTECTION: Yes
    OPEN CIRCUIT PROTECTION: Yes
    EARTH LEAKAGE PROTECTION: Yes
    IP RATING: Indoor type 7
    INPUT CABLE LENGTH: 6.5 ft.
    INPUT PLUG: 3 prong grounded
    ON/OFF SWITCH: Yes, Pull chain
    OUTPUT CABLE LENGTH: 2.6 ft.
    WEIGHT: 2.2 lbs.
    OVERALL DIMENSIONS: 6-1/4" L x 3-13/16” W x 1-7/8” H
    SEE ALL OUR LISTINGS FOR OTHER QUALITY NEON EQUIPMENT & SUPPLIES
    ____________________________________________________________________________
    PLEASE READ THE "FINE PRINT"
    FEEDBACK POLICY:
    I will be happy to leave positive feedback for you once I have received positive feedback. My feedback history will confirm my reciprocation.
    SHIPPING:
    FREE SHIPPING DISCLAIMER
    :
    Shipping for this item is free to the United States and Puerto Rico only. Other countries are subject to a shipping fee as determined by the eBay Global shipping Program.
    RETURN POLICY:
    PLEASE READ OUR
    RETURN POLICY DETAILS
    . THEY ARE LOCATED ON THE “SHIPPING AND PAYMENTS” TAB, WHICH IS LOCATED DIRECTLY TO THE RIGHT OF THE “DESCRIPTION” TAB ABOVE.
    BY PURCHASING THIS ITEM YOU ACKNOWLEDGE YOUR ACCEPTANCE OF OUR RETURN POLICY.
    IF YOU DO NOT AGREE WITH OUR RETURN POLICY, DO NOT PURCHASE THIS ITEM!
    IF YOU HAVE ANY QUESTIONS REGARDING OUR RETURN POLICY CONTACT US BEFORE PURCHASING.
    PLEASE NOTE:
    FOR OUR PROTECTION WE ARE REQUIRED TO SHIP THE ITEM TO THE ADDRESS THAT APPEARS ON THE "PAYPAL TRANSACTION DETAILS" PAGE THAT IS GENERATED BY PAYPAL.
    IT MUST BE A CONFIRMED PAYPAL ADDRESS
    . IF IT IS NOT, YOUR MONEY WILL BE REFUNDED AND THE SALE CANCELLED.
    PLEASE ASK ANY QUESTIONS YOU HAVE BEFORE BIDDING / BUYING