NEW 2021 PowerPlasma 82i, 80 Amps, CNC Option, Plasma Cutter w/ IPT-80 torch

Description

Power i-TIG 200T
Home
About Us
Contact Us
Shop Policies
FAQ
Feedback
SKU:
PowerPlasma-82i
Product Description
The PowerPlasma 82i is really a plasma cutter in a class by itself.  When you consider the performance capability of the machine, design features and the price of the unit together, there really is nothing to compare it to.  Sure there are a couple of 80-90 Amp plasma cutters on the market, but hey, if you are on a budget, they aren't even close to what we offer in a machine this size when all things are considered overall.  Here's a few features that the PowerPlasma 82i has that that should get your attention:
Digital Controlled Circuitry. This means reduced components and increased reliability
A Digital Air Pressure Gauge.  You can precisely monitor air pressure fluctuations.
Digital Air Pressure Setting Guide.  Color Coded LED's eliminate guess work for best air pressure setting.
Super Bright LED display.  Read your settings a greater distance and in brighter lighting than any other brand.
Adjustable Post-Flow Control.  This allows you to be in charge of how long the air flows, reducing annoyingly and unecessarily long post flow time, reducing air consumption and noise levels from contantly running compressors.
Built in CNC capability.  (See our CNC package for the machine torch option)
Gouge mode for moderate gouging needs.
A Pilot Arc Tip saver function and a Auto-relight function allows you to choose the best mode of operation for to choose whether to maximize consumable life, or maximize cutting capability and speed on rusty/painted or expanded metal.
60% Duty Cycle takes the unit into a very exclusive club.   This is the highest rated duty cycle of any plasma cutter on the market on 1 phase 240V input.  The competitors offer only 50% and 40% duty cycles on 1 phase 240V.
5 Year Warranty parts and labor warranty on the machine.  The best the competitors can do is 3 years.
A Price that beats anyone.  You'll be hard pressed to find a 40 amp plasma cutter at this price from the other guys.
PRODUCT EXTRAS
Features & Benefits:
Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
Cuts virtually any type of metal with ease
Simple to use torches with inexpensive service parts and consumables
Commercial/Industrial class, 60% Duty cycle at 80 amps
Clean, smooth cuts and improved consumable life with the new Italian designed iPT 80 torch
Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
Pilot arc improves performance and cutting on dirty, painted, or rusted metals
3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
Adjustable post flow control up to 50 seconds to improve consumable and torch life
Front air pressure gauge allows quick verification of air pressure
Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
IGBT modules from Infineon (Siemens) improve reliability and performance while reducing overall weight
CNC socket for CNC use on plasma tables (machine torch optional)
WHAT'S INCLUDED
Standard Equipment:
15ft. Italian designed and patented iPT 80 torch with Euro quick-connect central adapter
Work clamp with 10ft. cable and DINSE connector
Air pressure regulator/water trap (Separate air dryer is required to reduce consumable wear and prevent torch damage)
Consumable starter kit
OPTION
Optional Equipment:
iPT 80 CNC torch
Welding cart
Consumable kit
RECOMMENDED USES
Recommended Areas of Use:
Home shop
Motosports
Farm/Ranch
Commercial fabrication
Factory maintenance
HVAC
CNC
Recommended Metals:
Steel
Stainless
Aluminum
Copper
Titanium
Nickel/Nickel alloys
Virtually any metal including cast iron
TECH SPECS
Type:
IGBT
Voltage/phase:
220/240 V 1 Phase
Output Amp/Volt Range:
20-80A/88V-112V
OCV:
240V
Max Inrush ( I1MAX ) Amps:
@ 240V: 58A
Maximum Rated (I1EFF ) Input Amps:
@240V: 45.2A
Duty Cycle At Rated Amps/Volts:
60% @ 80A/112V
100% @ 63A/105V
Arc Start Type:
Blow Back (Piston type)
PilotArc:
Yes
Torch Type:
Italian designed iPT 80 machine torch
(Hand torch not included)
CNC Interface Port:
Yes
Adjustable Post Flow Timer:
Yes
Gouging:
Light to Medium
Recommended Cutting Air Pressure:
75psi
Recommended Compressor Capacity:
7CFM @ 90 psi/60 gallon tank
OK-to-Cut Indicator/Low Air pressure safety:
Yes
NOTES
Notes:
A separate inline air dryer must be provided by the customer to prevent torch damage, and excessive consumable wear. The unit includes a regulator/water trap, but is not designed to remove all water or moisture.
If using with a generator, use a generator rated by its manufacturer as providing "clean power".  This is usually 5% or less THD (total harmonic distortion).
Use with a geneator rated for at least a minimum of 15,000 surge watts.
This unit does not include a hand torch
.
MINIMUM/MAXIMUM
Up to 1" daily use @ 15-20 ipm
Up to 1 1/4" clean cut @ 8-12 ipm
Up to 1 7/16" severance cut @ 3-5 ipm
Pierce up to 5/8"
Plasma cutting capacity is affected by several factors.  Ideal cutting conditions require dry air, new consumables, proper air pressure etc.   Quality of cut depends upon consumable orifice size, standoff height,  and travel speed.
Returns
For returns, contact must be made within72 hours of delivery so an RMA number is issued. If there is damage, we can help file a damage claim immediately.
DOA items: In the event you receive a non working unit , we will exchange it free of charge.
Items returned must be in an GOOD condition. We will inspect all returns before accepting the package. We will not accept packages that have missing parts, damages, and packages that have not been approved for return by our initial contact or packages missing an RMA number. These packages will be refused and sent back to YOU at your cost.
Shipping Information:
1- We have an onsite professional shipping and packaging department and adhere to all shipping guidelines.
2- We will try to ship orders as soon as possible after payment approval unless otherwise stated in description. NOTE: Since there are many ways we offer our products, on rare occasions there is a chance an item may go out of stock that we have listed and sold on eBay. We will do our best to expedite backordered items as soon as possible.
3- Please provide a physical address. We will not ship to a PO Box.
4- Shipping charges are for the (48) Continental United States only.
5- We don’t ship to Canada
6- We charge CA tax on all orders 9.5%
7- If you pay via PayPal, shipping will be to your confirmed address only
8- Shipping to AK, HI and PR is more. please email for price.
Contact
Operating Hours:
Monday through Friday: 9AM to 5PM PSTSaturday: 11AM to 4PM (PST)