Pixracer R15 Autopilot Xracer PX4 Flight Controller For Drone FPV Mini Version

Description

Description
Pixracer R15 Autopilot Xracer PX4 Flight Controller For Drone FPV Mini Version
Description:
Pixracer R15 Autopilot xracer is the new generation PX4 flight controller mini version. The flight controller adopts the same hardware, circuit structure and foolproof socket as the official R15 version, and is equipped with a high-end CNC metal case, which has good heat dissipation and good shielding performance.
The R15 version uses an upgraded electronic compass ST LIS3MDL. The receiver circuit has been improved, and it has supported for Spektrum DSM2 / DSMX series receiver link function. The default software for PX4 Stack flight firmware can directly click Spektrum bind in the QGC software. You can enter receiver link mode. Pixracer is for PX4 Stack program by default. If you need to use a barometer to set the height, please purchase the matching GPS. You cannot use the flight control barometer to set the height.
Specifications:
Microprocessor:
* 32-bit STM32F427 Cortex M4 core with FPU rev. 3
* 168 MHz/256 KB RAM/2 MB Flash
Sensors:
* Invensense MPU-9250 3-axis accelerometer/gyroscope/magnetometer
* MEAS MS5611 barometer
* ST LIS3MDL magnetometer
Interfaces:
* 5 x UART (serial ports), one high-power capable, 2 x with HW flow control and GPS+I2C
* CAN
* For Spektrum DSM / DSM2 / DSM-X Satellite compatible input up to DX9 and above.
* For Futaba S.BUS & S.BUS2 compatible input
* For FRSky Telemetry port output
* For Graupner SUMD
* For Yuneec ST24
* For PPM sum input signal
* For OneShot PWM output (Configurable)
* RSSI (PWM or voltage) input
* I2C
* SPI
* External microUSB port
* JTAG
* Drone code debug connector
* WiFi Telemetry & firmware update via ESP8266 (Included!)
* 6 x PWM outputs
Package Included:
- 1 x Pixracer R15 Flight Controller
- 1 x CNC Aluminum Alloy Protective Shell
- 1 x ESP8266 Wifi Module
- 1 x Safety Switcher
- 1 x Buzzer
- 1 x Micro SD Card
- 1 x SD Card Reader
- 1 x Cables Set (For Receiver, GPS, I2C , Power module, Serial)
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
On Jun-17-20 at 00:00:20 PDT, seller added the following information: